SAVE UP TO 80% OF YOUR OPERATING COSTS!
Exhaust air filtration & Energy recovery for stenter frames
Exhaust air filtration & energy recovery at stenter frames
The exhaust air purification at stenter frames is particularly challenging, because the resulting exhaust air mixture includes a considerable amount of oil, fibre and possibly also wax particles and can be odor-intensive in certain cases. Depending on the location of use strict regulations and legal requirements exist concerning emission limit values at stenter frames.
Energy costs have a large impact on the production costs of the stenter frames.
Stenter frames are widely used in the textile-finishing sector for heat treatment of woven and knitted fabrics. The textile is not only dried in the stenter frame, but also heat treated for fixing. The operating temperature is mostly around 200°C depending on the process. In addition to the use of electrical energy (e.g. for motors and ventilators) the stenter frame needs a high thermal input, produced by expensive gas and thermal oil heating.
An unsuitable filter cell would rapidly clog up by the exhaust air from stenter frames, which results in high follow-up and replacement costs. Moreover, the exhaust air from stenter frames contains valuable waste heat, which can be used for follow-on processes.
Double heat recovery for double efficiency.
Through the energy recovery of 720 kW per hour more than 71.000€ of annual energy costs could be saved and reduced the CO2 emissions by more than 330 tonns every year. With an amortization period of 2 years the following energy savings benefit the operating result.
A customer from Turkey processes many types of different textiles in his production plant.
He was looking for an energy-efficient way of heat recovery and exhaust air purification for his new stenter frame with an exhaust air volume of 30.000 m3/h.
The goal was to reduce the high energy consumption of the stenter frame and to use the valuable heat from the exhaust air. The temperature of the exhaust air was 180°C on average.
For the customer two ULTRAVENT 20.000 filter systems were equipped with double electrostatic filter and double heat exchanger.
The KMA ULTRAVENT® filter system makes use of the valuable waste air in an energy-efficient manner. The integrated heat exchanger extracts thermal energy from the hot exhaust air, which is utilized for follow-up processes.
The recovered heat is employed to heat up the incoming supply air for the stenter frame.
This reduces the high energy consumption of the stenter frame by more than 1.800 € per week.
In addition, the washing water for the dye-work is also heated by heat recovery system.
The energy recovery of this filter system amounts to 720 kW per hour.
The saving of energy realizes a reduction of energy costs by more than 71.000€!
The profitable heat recovery led to an amortization period of 2 years.
The following energy savings benefit the operating results of the company.
Heat recovery for the supply air system of the stenter frame
Through the energy recovery of 720 kW per hour the CO2 emissions could be removed by more than 330 tonns every year. With an amortization period of 4 years the following energy savings benefit the operating result of Freudenberg Performance Materials a leading global manufacturer of innovative technical textiles.
Freudenberg Performance Materials is a leading global manufacturer of innovative technical textiles in very different industry sectors.
At the request of the customer, an existing ULTRAVENT 15000 filter system was combined with a new ULTRAVENT filter system 20000.
The integrated heat recovery system of the ULTRAVENT system shall reduce the energy demand of the stenter frame through the heating of the supply air.
The temperature of the exhaust air was 130°C on average.
The goal was to reduce the energy consumption of the stenter frame and to improve the clean air quality.
For Freudenberg Performance Materials the 20000 ULTRAVENT Filter System was equipped with lint pre-filter, double electrostatic filter and triple heat exchanger.
This new filter system was combined with the existing filter system ULTRAVENT 15000 upon request of the customer.
The recovered heat from the hot exhaust air is utilized for heating the incoming supply air.
Through the heat exchangers the supply air is heated from 10°C to 100°C and led into the stenter frame.
Due to the heating of incoming supply air the stenter frame needs less energy and thus reduces its gas consumption.
Due to the energy efficient operation of the electrostatic precipitator and the high energy recovery of 287 kW per hour Freudenberg Performance Materials saves more than 135 tons of CO2 emissions every year through the KMA filter system.
Thanks to the good clean air quality Freudenberg Performance Materials produces less than 10 mg/m3 according to the EU Standard.
The mentioned cost advantages enable an amortization period of less than 4 years.
Heat recovery for heating process water
The company Kirayteks saves 400€ energy costs every day and more than 300 tonns of CO2 emissions annualy due to the KMA filter systems. The cost advantage of the heat recovery leads to an amortization period of the new KMA exhaust air filtration system of less than 2 years.
The Company Kirayteks processes many types of different textiles in his production plant in Turkey.
For 6 stenter frames with an exhaust air volume of 18.000 m3/h an energy-efficient possibility for heat recovery and exhaust air purification should be realized.The temperature of the exhaust air was 180°C on average.
The goal was to reduce the energy consumption of the overall textile production and to use the valuable heat from the exhaust air for heating process water.
For the company Kirayteks the 20000 ULTRAVENT Filter System was equipped with lint pre-filter, double electrostatic filter and double heat exchanger.
The existing ventilators and pipelines could be kept.
The recovered heat is utilized for heating water for the laundry and dye-works.
By means of the automatic filter cleaning system not only the electrostatic filter cells and the heat exchanger are cleaned, but also the reuse of the process oil is possible.
Due to the high energy recovery of 650 kW per hour the company Kirayteks saves almost 400€ every day through the KMA Filter System.
The CO2 emissions are reduced by more than 300 tonns every year. Thanks to the good clean air quality Kirayteks produces less than 10 mg/m3 according to the EU Standard.
The daily recovery of 35 - 50 liters of process oil for a second use reduces the acquisition costs.
The mentioned cost advantages enable an amortization period of less than 2 years.
Your personal operating cost analysis